- Product description: DESCASE 04-618-12UM oil filter element is installed in the oil circuit of the hydraulic system. It is used to remove metal powder and other mechanical parts worn by various components in the hydraulic system to keep the circuit clean and extend the service life of the hydraulic system. . The low-pressure series filter element is also equipped with a bypass valve. When the filter element is not replaced in time, the bypass valve can automatically open and the system operates normally.

- Test standards: filter element - fatigue resistance verification according to ISO 2941, filter element - structural defects according to ISO 2942, filter element - material and liquid compatibility verification according to ISO 2943, filter element - end load test method according to ISO 3723, filter element - fatigue characteristics The measurement is based on ISO 3724, the filter element - differential pressure flow characteristics is based on ISO 3968, the filter element - the multiple pass method for determining filtration characteristics is based on ISO 4572.

- Technical parameters:

  1. Filter element pressure difference: 21MPa

  2. Working temperature: -10～+100℃

  3. Filtration precision: 5～20μm

  4. Working medium: general hydraulic oil.

04-618-3UM oil filter element

- Product description: DESCASE 04-618-3UM oil filter element is installed in the oil circuit of the hydraulic system to remove metal powder and other mechanical impurities worn by components in the hydraulic system to keep the oil circuit clean and extend the life of the hydraulic system; low pressure Series filter elements are also equipped with bypass valves. When the filter element is not replaced in time, the bypass valve can automatically open and the system operates normally.

- Testing standards: filter element - verification of rupture resistance according to ISO 2941, filter element - structural integrity according to ISO 2942, filter element - verification of material and liquid compatibility according to ISO 2943, filter element - end load test method according to ISO 3723, filter element - fatigue The characteristics are measured according to ISO 3724, the filter element - differential pressure flow characteristics according to ISO 3968, the filter element - the multiple-pass method for determining the filtration characteristics according to ISO 4572.

- Technical parameters:

  1. Filter element pressure difference: 21MPa

  2. Working temperature: -10～+100℃

  3. Filtration precision: 5～20μm

  4. Working medium: general hydraulic oil.

Leah  Sales Manager

Email:  h@dmlfilter.com    

Mob & WhatsApp & Wechat & Skype: (+86)19937372138